Modern 3-Stage R.O Water System 100GPD with Pressure Pump & Tank

3-Stage R.O. Filtration System

• 5-micron carbon block from coconut shell filter (T33) to reduce free chlorine, chloramines, chlorine taste and odor & suspend particles such as dirt, sand, rust, etc.
• High-production USA made 100GPD reverse osmosis (R.O) membrane that reduces dissolved solids, metal ions, bacteria and viruses and other suspended particles as small as 0.0001 micron.
• Granular carbon from coconut shell (CTO) for water conditioning & improve water taste /odor.

TDS Blending Valve: Many times there is the desire to raise the total dissolved solids (TDS) of our filtered water. This is due to the fact that the purified water produced by the reverse osmosis water systems have usually a TDS value of ~25-35 ppm. For the best drinking water quality and personal well-being it is recommended that the TDS value should be ~80-150ppm. To achieve a TDS value in that range we use a TDS blending (mixing) valve.  The set-up of the blending valve is recommended to be set by a specialist when installing the water purifier.

TDS blending is incredibly simple and involves mixing your filtered water (water filtered by the first two pre-filters: GAC and sediment) with the R.O water to achieve a TDS that's desirable to your needs and taste. Since the water sytem already includes the two pre-filters, the feed line between the pre-filter system and the R.O pump is tapped and as mentioned above the filtered water (not raw water), is mixed/blend with the purified R.O water in order to produce the desired TDS value.

Pressure Switches: The system is equipped with low and high pressure switches. The low pressure switch shuts off the pump when there is no inlet water or its pressure is too low. The high pressure switch shuts off the pump when the filtered water faucet is turned off.

Booster pressure pump: it offers the advantages of favorable wastewater-treated water ratio (about 60:40), also operates in places with lower water pressure (smaller settlements, homesteads, 10th floor) and offers faster tank filling.

Autoflush function: The purpose of the flush system is to help prevent scaling or fouling of the R.O membrane by providing a rapid rinse after each use which washes away impurities and keeps the membrane and the tubing clean.

Faucet:  Designer faucet for filtered water is included and usually mounted on the sink deck or countertop for dispensing the clean, filtered water from the filtered water outlet of the main R.O. unit.

Drain Saddle: Fits a standard 1.5” diameter drain pipe to drain the waste water from the drain outlet of the pump box.

R.O. membrane: The fourth and main stage of the filtration is high-production R.O. membrane. It is “semi-permeable”, which means that it allows water to pass through but prevents dissolved particles from passing through. It splits the feed water into two streams: clean water goes to the post-filter and then onto the faucet. Waste water with rejected particles goes down the drain.

Post-Filter: Last stage of filtration is an granular carbon post-filter for fine conditioning and to keep the extra freshness of your water.

Pre-Filter: It is recommended to install a 5um sediment pre-filter before the R.O water system in order to provide further filtration of the inlet water and protect the R.O. membrane from dirt often found in tap water.

• Filtration water system with 3 stages (additional filters or a UV lamp can be added to the system at an additional cost).
• 12 litre pressure tank 
• High & Low pressure switches
• External Power Adapter
• Autoflush function
• Reduces TDS by 20 times because of the large and high rejection rate membrane and the booster pump. 
• Clean and safe drinking water right in your home. No need to transport and dispose of bottled water any more.
• Factory pre-installed filters and membrane for faster and easier setup.
• Filters and membrane quick-change housings for easy maintenance.
• Compact and beautiful design.
• Booster pump increases pressure to radically improve the performance and effectiveness of the R.O. unit in all three key areas: increases filtered water flow (production rate), increases rejection rate (improves water purification quality), increases recovery rate (decreases amount of waste water). Prolongs the membrane and pre-filter(s) service life due to increased recovery rate.
• Fully automatic operation of the water system: just open the faucet and get clean water instantly.
• Split, flexible installation possible where needed: install the water system up to 15 meters away from the faucet. Useful for the situations like lack of space or lack of electrical outlet under the sink or moving the unit to a more appropriate place.

Benefits of the R.O. system

• Its reverse osmosis system works with one of the best quality membranes on the market (FILMTEC) to produce the best possible water quality.
• Due to its modern design, it can be placed either under the counter or above the counter. It is suggested to place the pressure tank under the counter.
• Its sleek and compact design makes it easy for prospective water treatment owners to choose quality, good-looking products.
• Its sophisticated shaped faucet fits easily in modern kitchens.
• Easy water system installation and setup, but of course you can also ask for the help of our specialist.
• It is easy to maintain and allows you to change the filters by yourself and trouble-free.
• Quick connect type in-line post-filter.
• Rustproof shiny plexiglass surface.
• It can work with low pressure 1 bar.

• Modern Filtration Unit box
• 12” quick connect type, 5-micron T33 carbon block 
• 12” quick connect type, Granular carbon conditioning (CTO) filter
• Reverse osmosis membrane (100GPD FILMTEC)
• Quick connect type in-line post-filter
• Connectors & fittings
• Designer Faucet
• Pressure tank 12L
• Installation Kit

Technical parameters:

• Operation pressure: 1-5 bar with pump
• Maximum water salanity: 2000 ppm (mg/l)
• Temperature of feeding water: 2-38 °C
• Permissible water pressure: 3 - 7 bar
• Needs 240V/13A for the pressure pump to work

Capacity: Maximum capacity 380 liters / day.

Notice: The quality of the treated water depends on the pressure, contamination and temperature of the water to be treated. One important thing: the water purifier removes contaminants for approx. It filters out 95% of the water! It collects only a few percent of these contaminants, while flushing almost all of the contaminants back into the sewer system! This is the best working water purification method in the world today!

Please send us a request to provide you with the certificates.

Dimension (HxDxW): 450x170x450 mm

Tank dimension: 430xØ280 mm

Shipping Weight: 12 kg (with pump)

System Maintenance

Filter 1: 5-micron carbon block T33 filter "PUSH IN"

Filter 2: 100GDP FILMTEC reverse osmosis membrane

Filter 3 :  Granular carbon conditioning filter (CTO) "PUSH IN"

It is advisable to replace the 2 carbon cartridges (1st & 3rd) every 6-12 months depending from your water quality. The R.O membrane should be replaced every 24 months.

ATTENTION: Please note that the safe operation of the device requires proper professional filter replacement and maintenance.

3 years worldwide limited warranty (+ local regulations if applicable).

Product must be installed only by trained service professionals. Only original replacement parts, filter cartridges and accessories made by manufacturer may be used.